Introduction to CO2 transport Roots blower and Roots Blower advantages and features

CO2 transport Roots blowera rotary compressor that uses two lobed rotors to move relative to each other in a cylinder to compress and transport gas.，the product looks beautiful.，features include wide application range, economical and durable, low noise, convenient manufacture and run smoothly，it is widely used inmake paper,building materials,smelt,petrochemical industry,manufacturing industry and other industries，is developed and improved by hyde powder。The following is to introduce the CO2 transport Roots blower:

1、Brief introduction of CO2 transport Roots blower

CO2 transport Roots bloweris a device that generates positive pressure or negative pressure through the relative rotation of two impellers, thus compressing and conveying gas.，the advantage is Because of the design of three-blade rotor, the CO2 transport Roots blower has little vibration and low noise during operation, and the operation is stable and reliable、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the CO2 transport Roots blower less vibration and noise.、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the CO2 transport Roots blower perform well in many situations where stable airflow is needed.、Due to the adoption of synchronous gear transmission and small gap design, the CO2 transport Roots blower runs stably and reliably, without contact and wear parts, and has a long service life.，is carefully developed by hyde powder combined with advanced technology。

CO2 transport Roots blower

2、Structural advantages of CO2 transport Roots blower

The CO2 transport Roots blower has the following structure

1. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the CO2 transport Roots blower, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

2. muffler

Used to reduce the noise caused by airflow pulsation when the CO2 transport Roots blower enters and exits.

3. impeller

It is the rotating part of the CO2 transport Roots blower, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf CO2 transport Roots blower has gradually replaced the two-leaf CO2 transport Roots blower.

4. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

5. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

CO2 transport Roots blower

3、CO2 transport Roots blower introduction video

hyde provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the CO2 transport Roots blower production process and production site, and gain favorable comments and recognition from customers.。

CO2 transport Roots blower

As you can see from the live video.，Shandong Haide Fenti Engineering Co., Ltd. Small size and small floor space make it easy to arrange and install in places with limited space.、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the CO2 transport Roots blower perform well in many situations where stable airflow is needed.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.。

4、Advantages of CO2 transport Roots blower principle

CO2 transport Roots blowerIt mainly depends on the relative movement of two lobed rotors (usually three-bladed impellers) in the cylinder to compress and transport gas.，the main features are wide application range, be of simple construction, energy-efficient, economical and durable and run smoothly，widely used in Flue gas treatment, power, aquaculture, Food and beverage processing, Pharmaceutical and chemical industries and other fields，is an efficient volumetric gas conveying and pressurizing equipment.，the advantage is Small size and small floor space make it easy to arrange and install in places with limited space.、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、In the process of air intake and exhaust, the CO2 transport Roots blower will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the CO2 transport Roots blower less vibration and noise.、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.。

CO2 transport Roots blower

5、Introduction of CO2 transport Roots blower characteristics

CO2 transport Roots blowerit has the characteristics of stable and reliable, strong adaptability, wide application range, convenient manufacture and low noise，usually used in chemical fertilizer, aquaculture, Textile light textile, power, sewage disposal and other fields，Due to the adoption of synchronous gear transmission and small gap design, the CO2 transport Roots blower runs stably and reliably, without contact and wear parts, and has a long service life.、Because of the design of three-blade rotor, the CO2 transport Roots blower has little vibration and low noise during operation, and the operation is stable and reliable、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the CO2 transport Roots blower perform well in many situations where stable airflow is needed.、In the process of air intake and exhaust, the CO2 transport Roots blower will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.。

CO2 transport Roots blower

6、Real-time shooting in hyde powder's production workshop

The finished products of the CO2 transport Roots blower factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

hyde

The finished products of the CO2 transport Roots blower factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

CO2 transport Roots blowerat the start of the operation,When the motor drives one impeller to rotate, the other impeller will rotate synchronously at the same speed and in the opposite direction under the action of the synchronous gear. In the process of rotation, because the gaps between impeller and impeller, impeller and casing, impeller and wallboard are very small, a vacuum state is formed at the air inlet, and air is sucked into the air inlet cavity under the action of atmospheric pressure. As the impeller continues to rotate, two blades of each impeller, the wallboard and the casing form a sealed cavity, and the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades. Because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out. After continuous inhalation and extrusion, air is continuously transported from the air inlet to the air outlet, completing the whole gas transportation process.，the product looks atmospheric.，It has a wide range of uses, and is often used inaeration,Desulfurization oxidation,Ventilation,Material fluidization,mix and so on。