Introduction to 304 stainless steel three leaf Roots vacuum pump, how much is the price of the blower?

2025-5-26

304 stainless steel three leaf Roots vacuum pumpis a positive displacement blower with forced gas transmission characteristics.，the product looks beautiful.，It is a product series that integrates material handling, cool, Material fluidization, supply air and sewage disposal，at work,Gas is compressed and transported based on the relative motion of two lobed rotors in the cylinder.，Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the 304 stainless steel three leaf Roots vacuum pump perform well in many situations where stable airflow is needed.、Small size and small floor space make it easy to arrange and install in places with limited space.、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the 304 stainless steel three leaf Roots vacuum pump perform well in many situations where stable airflow is needed.。The following is to introduce the 304 stainless steel three leaf Roots vacuum pump:

1、Brief introduction of 304 stainless steel three leaf Roots vacuum pump

304 stainless steel three leaf Roots vacuum pumpis a device that generates positive pressure or negative pressure through the relative rotation of two impellers, thus compressing and conveying gas.，The overall structural design is simple, diverse and beautiful.，the main structure includes rotator, fuel tank, bearing, muffler, impeller and so on，The two three-blade impellers rotate relatively in the space sealed by the casing and the wallboard. Each impeller adopts the envelope of involute or epicycloid, the three blades of each impeller are exactly the same, and the two impellers are also exactly the same, which greatly reduces the machining difficulty. During the rotation of the impeller, air enters the air inlet cavity under the action of atmospheric pressure, and then two blades of each impeller, the wallboard and the casing form a sealed cavity. During the rotation of the impeller, the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades, and because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out, so that the air is continuously transported from the air inlet to the air outlet.，It has the functions of aeration, dehydrate, Ventilation, dehydrate and Desulfurization oxidation，has been favored by more and more customers.。