Brief introduction and functional advantages of Quantitative feeding and conveying system

Quantitative feeding and conveying systemis a technology that uses compressed air or aerodynamic force to transport materials from one point to another.，High productivity,Simple system,Quantitative transportation,Centralized transportation,No secondary pollution，is a Quantitative feeding and conveying system，it is an ideal choice for customers to buy Quantitative feeding and conveying system。The following is to introduce the Quantitative feeding and conveying system:

1、Brief introduction of Quantitative feeding and conveying system

Quantitative feeding and conveying systemthat is, the technology of conveying granular materials in closed pipes by air flow.，has been favored by more and more customers.。

Quantitative feeding and conveying system

2、Quantitative feeding and conveying system video

Speak directly with facts on the spot。

Quantitative feeding and conveying system

As you can see from the live video.，Shandong Haide Fenti Engineering Co., Ltd. is a reliable material conveying equipment for conveying powdery materials under high pressure.。

3、Functional advantages of Quantitative feeding and conveying system

The advantages of Quantitative feeding and conveying system are as follows:

1. Environmental protection and pollution-free

Because the Quantitative feeding and conveying system is carried out in a closed pipeline, the loss and pollution of materials during transportation can be effectively reduced. This not only improves the utilization rate of materials, but also reduces the production cost.

2. The quality of convey materials is ensure.

In the process of conveying, the Quantitative feeding and conveying system can prevent the materials from getting wet, soiled or mixed with other impurities, thus ensuring the quality of the conveyed materials.

3. Flexible configuration of conveying pipeline and optimization of process flow.

The conveying pipeline can be flexibly configured according to the actual layout of the factory, which makes the process configuration of the factory equipment more reasonable, optimizes the production process and improves the labor productivity.

4. Wide application range

For materials with unstable chemical properties, the Quantitative feeding and conveying system system can use inert gas for transportation to ensure the stability of the materials during transportation.

5. Multi-point to multi-point transportation

The Quantitative feeding and conveying system system can realize multi-point to multi-point transportation, meet the needs of different production lines and improve the production flexibility.

Quantitative feeding and conveying system

4、Structural advantages of Quantitative feeding and conveying system

The Quantitative feeding and conveying system structure is introduced as follows:

1. Air source device

The air source device is the power core of the Quantitative feeding and conveying system system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

2. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

3. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Quantitative feeding and conveying system system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

4. Air source device

The air source device is the power core of the Quantitative feeding and conveying system system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

5. control system

The control system is the "brain" of the Quantitative feeding and conveying system system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

Quantitative feeding and conveying system

5、Working principle of Quantitative feeding and conveying system

Quantitative feeding and conveying systemat runtime,Mainly based on aerodynamic force, compressed air or other gases generate airflow, so that material particles are suspended in the airflow or transported in groups along the pipeline. In pressure transportation, high-pressure gas pushes materials to flow along the pipeline; In vacuum transportation, the material is sucked and transported to the target position through the negative pressure environment in the pipeline.，It is mostly used in Long-distance and multipoint transportation, Bulk material transportation, Multi-point transportation, Heating, cooling and drying, Reduce pollution, Environmental protection and cleaner production and so on。

Quantitative feeding and conveying system

6、How to choose the right product manufacturer?

Choosing a suitable Quantitative feeding and conveying system manufacturer requires comprehensive consideration of many aspects. First of all, we should examine the strength of manufacturers, including production capacity, R&D team and industry experience. Strong manufacturers can better ensure product supply and innovation ability. Secondly, product quality is the key, and it is evaluated by product certification, material selection and manufacturing process to ensure the durability of products. Product performance can not be ignored, so we should choose manufacturers with matching technical parameters, rich types and customized services according to actual needs. After-sales service is equally important. Professional and timely service team, perfect after-sales content and extensive service network can make users worry about nothing. In addition, market reputation is also an important reference. We can understand the reputation and status of manufacturers through customer evaluation, industry reputation and award-winning honor. Finally, it is necessary to analyze the price and cost performance, and on the premise of ensuring the quality and performance, choose a manufacturer with reasonable price and high cost performance, so as to purchase Quantitative feeding and conveying system products that meet the demand and have good cost performance.。

hyde powder

Quantitative feeding and conveying systemit has the functions of Environmental protection and pollution-free, Automatic control, Physical processing assistance, material handling and Environmental protection and pollution-free，The overall structural design is simple, diverse and beautiful.，it mainly includes Conveying pipeline system, Air source system, delivery system, Bunker system and control system，the principle is simple.It mainly uses the energy of airflow to transport granular materials along the airflow direction in a closed pipeline.。