What is a Metal particle transportation? Introduction to the principle of Powder pneumatic conveying structure

Metal particle transportationis an efficient and environment-friendly way to transport materials by using the energy of airflow.，the advantage is High conveying speed, good conveying quality and high conveying efficiency.、It can send materials concentrated from several points to one place or from one place to scattered points, and realize long-distance operation.、Materials are transported by closed pipelines.，Less dust flying, meeting the requirements of environmental protection, fully sealed and pollution-free transportation.、In the conveying process, various technological operations can be carried out at the same time.、The whole conveying process is sealed.，Can reduce the pollution to the surrounding environment during transportation, and is fully sealed and pollution-free for transportation.，is a popular Metal particle transportation，is carefully developed by hyde combined with advanced technology。

1、Brief introduction of Metal particle transportation

Metal particle transportationis a concrete application of fluidization technology to transport granular materials along the direction of airflow in a closed pipeline by using the energy of airflow.，Cheap and high quality。

Metal particle transportation

2、Metal particle transportation performance advantage

Metal particle transportations have the following advantages.

1. Multiple process operations can be carried out at the same time

In the process of conveying, the Metal particle transportation system can also perform physical operations such as heating, cooling, drying and airflow classification or some chemical operations at the same time, which increases the versatility of the system.

2. Save space

Metal particle transportation equipment usually occupies a small area and can make full use of space. This is especially important for factories or production lines with limited space, which can save valuable production space.

3. The quality of convey materials is ensure.

In the process of conveying, the Metal particle transportation can prevent the materials from getting wet, soiled or mixed with other impurities, thus ensuring the quality of the conveyed materials. This is especially important for some industries that require high material quality.

4. Easy to maintain

The Metal particle transportation device has the advantages of simple structure, few moving parts, convenient maintenance and reduced maintenance cost. At the same time, the equipment occupies a small area and can make full use of space.

5. High degree of automation

The Metal particle transportation system is easy to realize automatic control, and can be operated and monitored remotely through the central console, which reduces the labor cost and improves the production efficiency and management convenience.

Metal particle transportation

3、Structural characteristics of Metal particle transportation

The Metal particle transportation has the following structure

1. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

2. control system

The control system is the "brain" of the Metal particle transportation system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

3. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

4. Air source device

The air source device is the power core of the Metal particle transportation system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

5. control system

The control system is the "brain" of the Metal particle transportation system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

Metal particle transportation

4、On-site real shot of Metal particle transportation

Details of hyde powder Metal particle transportation,the product looks beautiful.。

Metal particle transportation

Note: All the pictures in this article were taken by hyde manufacturer.。

5、Metal particle transportation video live broadcast

Speak directly with facts on the spot。

Metal particle transportation

As you can see from the live video.，hyde powder The overall structural design is simple, diverse and beautiful.，it mainly includes Bunker system, Air source system, control system, delivery system and Conveying pipeline system。

6、Metal particle transportation price consultation

The Metal particle transportation price is introduced as follows:

1. Parameter size

There are several specifications and models of Metal particle transportation, and the specific price varies with different configurations. In addition, according to different customer needs, it is necessary to configure suitable Metal particle transportation, and the budget and other requirements recommend suitable Metal particle transportation for everyone.

2. manufacturing cost

A Metal particle transportation needs to spend a lot of manufacturing costs from research and development to production to sales, including raw material costs, technical costs, labor costs, etc. The higher the manufacturing cost, the higher the price will be.

3. Sales model

Direct-selling manufacturers are cheaper than second-and third-tier dealers because the former earns the difference without going through middlemen; Online sales are cheaper than offline sales, because you need to invest in store fees, employee fees and other related expenses in the later stage; Close-distance sales are cheaper than long-distance sales because the latter consumes a lot of transportation costs.

4. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

5. service

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Metal particle transportation price and service can meet the actual needs of customers.

Metal particle transportation

Metal particle transportationis a kind of material conveying system which uses the energy of airflow to convey granular or powdery materials along the airflow direction in a closed pipeline.，it has the characteristics of Good dustproof effect, Can make full use of space, Low energy consumption, The conveying speed is faster and Economic and environmental protection。