Brief introduction and advantages of Mixing and conveying of powder particles

Mixing and conveying of powder particlesmainly based on aerodynamic force, granular materials are transported along the airflow direction in a closed pipeline by using the energy of airflow.，has been favored by more and more customers.。

1、Brief introduction of Mixing and conveying of powder particles

Mixing and conveying of powder particlesis to transport granular materials along the direction of airflow in a closed pipeline by using the energy of airflow.，the product looks beautiful.。

Mixing and conveying of powder particles

2、Mixing and conveying of powder particles characteristics

Mixing and conveying of powder particlesfeatures include Reliable equipment, Avoid material pollution, High system reliability, No secondary pollution and Simple system。

Mixing and conveying of powder particles

3、Mixing and conveying of powder particles use

The purpose of Mixing and conveying of powder particles is introduced as follows:

1. Long distance transportation

The Mixing and conveying of powder particles system can realize long-distance material transportation and meet the demand of long-distance material transfer. This is especially important for some large factories or cross-regional material transportation.

2. Reduce pollution

The Mixing and conveying of powder particles system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

3. Dust removal and purification

The Mixing and conveying of powder particles system is usually equipped with a dust collector to collect and treat the dust generated in the transportation process to keep the production environment clean and hygienic.

4. Process assistance

In some production processes, Mixing and conveying of powder particless are not only used for conveying materials, but also as part of the process. For example, in the chemical and pharmaceutical industries, the Mixing and conveying of powder particles system can cooperate with other equipment to realize process operations such as mixing, grading, drying and cooling of materials, and improve production efficiency and product quality.

5. Bulk material transportation

The Mixing and conveying of powder particles is especially suitable for conveying powdery, granular and flowable bulk materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, pharmaceutical powder, etc. Through the Mixing and conveying of powder particles, these materials can be efficiently transferred between different production links or equipment.

Mixing and conveying of powder particles

4、Mixing and conveying of powder particles function

Mixing and conveying of powder particlesmultifunctional, with functions such as Closed conveying, material handling, Environmental protection and pollution-free, material handling and Automatic control。

Mixing and conveying of powder particles

5、Mixing and conveying of powder particles advantage

The advantages of Mixing and conveying of powder particles are as follows:

1. be of simple construction

The structure is relatively simple and the operation is very convenient. It can be transported flexibly in horizontal, vertical or inclined directions to adapt to different production environments.

2. energy saving and environmental protection

The Mixing and conveying of powder particles system can reduce the scattering and flying of materials, reduce dust pollution and material loss, and also reduce energy consumption and noise pollution during transportation.

3. Improve conveying efficiency

The Mixing and conveying of powder particles system can realize the direct transportation of bulk materials without additional packaging and loading and unloading processes, thus significantly improving the transportation efficiency and reducing the cost of packaging, loading and unloading transportation.

4. Environmental protection and pollution-free

In the process of Mixing and conveying of powder particles opening, dust pollution and noise pollution will hardly occur, which is more environmentally friendly than traditional mechanical transportation.

5. Strong adaptability

A conveying system can convey different kinds of products at different times. In fact, all powders and particles can be transported by the Mixing and conveying of powder particles.

Mixing and conveying of powder particles

6、Mixing and conveying of powder particles price

The Mixing and conveying of powder particles price is introduced as follows:

1. After-sales service level

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Mixing and conveying of powder particles price and service can meet the actual needs of customers.

2. raw material

The raw materials used by manufacturers of different products will definitely be different. Some manufacturers use good raw materials for processing, and the cost of producing and manufacturing products is definitely high. If the quality of products produced by manufacturers is not guaranteed and the materials used are not very good, then the production cost of products will be low, and the price will be very low.

3. regional difference

If the location of the manufacturer is superior, its transportation will be more convenient. hyde address:jinan, Shandong province has convenient transportation, which provides a good convenience for the transportation of Mixing and conveying of powder particles.

4. Brand strength

At present, there are various brands of Mixing and conveying of powder particles in jinan, Shandong province. The performance, quality and after-sales of products under different brands are different, and the prices of Mixing and conveying of powder particles are different.

5. Proper management mode

Direct-selling manufacturers are cheaper than second-and third-tier dealers because the former earns the difference without going through middlemen; Online sales are cheaper than offline sales, because you need to invest in store fees, employee fees and other related expenses in the later stage; Close-distance sales are cheaper than long-distance sales because the latter consumes a lot of transportation costs.

Mixing and conveying of powder particles

Mixing and conveying of powder particlesthe advantage is Large conveying capacity, long conveying distance and high conveying quality.，meet the needs of material transportation、The conveying system is closed, which can prevent the materials from being affected with damp, soiled and mixed with other sundries in the conveying process, and ensure the conveying quality of the materials.、Multi-point feeding and multi-point discharging are possible.、Closed pipeline transportation，Effectively prevent materials from absorbing moisture, fouling or mixing with other impurities during transportation, and fully seal and transport without pollution.、In the conveying process, various technological operations can be carried out at the same time.，Simple structure and reliable operation.，the main structure includes control system, delivery system, Bunker system, Air source system, delivery system and so on。