Brief introduction and advantages of Slag conveying equipment

Slag conveying equipmentthat is, the technology of conveying granular materials in closed pipes by air flow.，the principle is simple.Mainly using the dynamic pressure and static pressure of air, the material particles are suspended in the airflow or transported in groups along the pipeline.。

1、Brief introduction of Slag conveying equipment

Slag conveying equipmentis a technology that uses the energy of airflow to transport granular materials along the direction of airflow in a closed pipeline.，is a common Slag conveying equipment，The structure is novel, special, advanced, reasonable and scientific.，it is usually composed of Air source system, control system, Air source system, dust pelletizing system and Bunker system，it is widely used in grain processing, medicine, chemical industry, building material, logistics and other industries，has been favored by more and more customers.。

Slag conveying equipment

2、Slag conveying equipment display

Exquisite design, excellent material selection, reliable quality and high-definition pictures for our customers to visit.。

Slag conveying equipment

Note: All the pictures in this article were taken by hyde manufacturer.。

3、Advantages of Slag conveying equipment principle

Slag conveying equipmentMainly based on aerodynamic force, compressed air or other gases generate airflow, so that material particles are suspended in the airflow or transported in groups along the pipeline. In pressure transportation, high-pressure gas pushes materials to flow along the pipeline; In vacuum transportation, the material is sucked and transported to the target position through the negative pressure environment in the pipeline.，is a process of transporting bulk materials from one or more sources to one or more destinations by using airflow as a transport medium.，is developed and improved by hyde powder。

Slag conveying equipment

4、Slag conveying equipment structure

The Slag conveying equipment structure is introduced as follows:

1. Air source device

The air source device is the power core of the Slag conveying equipment system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

2. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

3. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

4. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Slag conveying equipment system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

5. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

Slag conveying equipment

5、Slag conveying equipment performance advantage

The advantages of Slag conveying equipment are as follows:

1. be of simple construction

Slag conveying equipment has simple structure and convenient operation.

2. The quality of convey materials is ensure.

In the process of conveying, the Slag conveying equipment system can prevent the materials from being wetted, stained or mixed with other sundries, thus ensuring the quality of the conveyed materials.

3. Convenient maintenance and easy automation.

The Slag conveying equipment system does not need a lot of mechanical equipment, so its maintenance cost is relatively small. In addition, in the process of use, it is only necessary to clean the pipeline regularly and keep it airtight.

4. Small floor space

Compared with the traditional mechanical transportation mode, the equipment and pipelines required by the Slag conveying equipment occupy a smaller area, which can make full use of the space and reduce the construction cost and floor space of the factory building.

5. Environmental protection and pollution-free

Because the Slag conveying equipment is carried out in a closed pipeline, the loss and pollution of materials during transportation can be effectively reduced. This not only improves the utilization rate of materials, but also reduces the production cost.

Slag conveying equipment

6、Advantages of Slag conveying equipment principle

Slag conveying equipmentin the course of work,The material and air flow form a gas-solid two-phase flow to realize continuous and stable material transportation.。

Slag conveying equipment

Slag conveying equipmentCommonly used inMulti-point transportation,cut down on energy consumption,Environmental protection and cleaner production,Bulk material transportation,Dust removal and essence and so on，the advantage is Not only can the materials from multiple feeding points be conveyed to the discharging point in turn, but also the materials from multiple feeding points can be conveyed to the discharging point at the same time.、In the conveying process, various technological operations can be carried out at the same time.、Large conveying capacity, long conveying distance and high conveying quality.、In the process of transportation, various technological operations can be carried out at the same time, such as physical and chemical processes such as mix.、Not only can the materials from multiple feeding points be conveyed to the discharging point in turn, but also the materials from multiple feeding points can be conveyed to the discharging point at the same time.。