Brief introduction and advantages of Potassium chloride pneumatic conveying

Potassium chloride pneumatic conveyingis a technology that uses the energy of airflow to transport granular materials along the direction of airflow in a closed pipeline.，Can realize the transportation of materials in a closed pipeline.，Less dust flying and spilling, good environmental sanitation conditions, complete sealing and pollution-free transportation.、In the process of transportation, various technological operations can be carried out at the same time, such as physical and chemical processes such as be broken.、The pipeline layout is flexible, and it can be arranged according to the specific terrain.，meet the needs of material transportation、It can send materials concentrated from several points to one place or from one place to scattered points, and realize long-distance operation.、The materials are completely sealed during transportation.，It can prevent the transported materials from being affected with damp, soiled or mixed with foreign matters, and it is completely sealed and pollution-free to transport.，the principle is simple.Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline. In the process of transportation, gas-solid separator (such as dust collector) is used to separate materials from air to ensure the quality of transported materials.，is a popular Potassium chloride pneumatic conveying，it has the characteristics of Convenient maintenance, automation, The conveying speed is faster, Avoid material pollution and Economic and environmental protection。The following is to introduce the Potassium chloride pneumatic conveying:

1、Brief introduction of Potassium chloride pneumatic conveying

Potassium chloride pneumatic conveyingIt refers to a mode of transportation in which granular materials are continuously transported according to the specified route with the help of air energy (kinetic energy or static pressure energy) in the pipeline.，it is widely used inlogistics,machine building,power,heat-engine plant,heat-engine plant and other industries，is carefully developed by hyde combined with advanced technology。

Potassium chloride pneumatic conveying

2、Introduction of Potassium chloride pneumatic conveying characteristics

Potassium chloride pneumatic conveyingHigh reliability,Save manpower,Flexible layout,System modularization,Easy maintenance，the product looks atmospheric.，at the start of the operation,Air flow is generated by compressed air or other gases, and a certain air flow speed and pressure are formed in the pipeline. These air currents suspend the material particles in it, or transport the materials along the pipeline in a group state. In this process, the material particles are in a liquid state under the action of airflow, so as to realize the continuous and stable transportation of materials.，is developed and improved by hyde。

Potassium chloride pneumatic conveying

3、Potassium chloride pneumatic conveying use

The purpose of Potassium chloride pneumatic conveying is introduced as follows:

1. Heating, cooling and drying

Heating, cooling or drying equipment can be installed in the Potassium chloride pneumatic conveying pipeline to carry out necessary treatment of materials to meet the specific requirements in the production process.

2. save energy and cut emissions

Although the Potassium chloride pneumatic conveying system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

3. Environmental protection and cleaner production

The Potassium chloride pneumatic conveying process is carried out in a closed pipeline, which effectively prevents dust from flying and leaking, thus reducing environmental pollution and harm to employees' health. This is especially important for industries that need to maintain high cleanliness or dust-free environment.

4. cut down on energy consumption

Although the power consumption of the Potassium chloride pneumatic conveying is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

5. Dust removal and purification

The Potassium chloride pneumatic conveying system is usually equipped with a dust collector to collect and treat the dust generated in the transportation process to keep the production environment clean and hygienic.

Potassium chloride pneumatic conveying

4、Structural advantages of Potassium chloride pneumatic conveying

The Potassium chloride pneumatic conveying has the following structure

1. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Potassium chloride pneumatic conveying system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

2. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

3. control system

The control system is the "brain" of the Potassium chloride pneumatic conveying system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

4. Air source device

The air source device is the power core of the Potassium chloride pneumatic conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

5. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

Potassium chloride pneumatic conveying

5、Potassium chloride pneumatic conveying principle

Potassium chloride pneumatic conveyingat runtime,Using aerodynamic force, compressed air or other gases form airflow in the pipeline, and the material particles are suspended in the airflow or transported along the pipeline in groups.，also known as airflow transportation, is a way to transport granular materials along the airflow direction in a closed pipeline by using the energy of airflow.。

Potassium chloride pneumatic conveying

Potassium chloride pneumatic conveyingthe main features are Strong adaptability, convenient to use, Stable operation, Various processes and versatility，is a Potassium chloride pneumatic conveying，It has the functions of Long-distance and multipoint transportation, Reduce pollution, Bulk material transportation, Heating, cooling and drying and Process assistance。