Introduction to Light hydrocarbon gas pressurized Roots blower and Roots Blower working principle

Light hydrocarbon gas pressurized Roots blowera rotary compressor that uses two lobed rotors to move relative to each other in a cylinder to compress and transport gas.。

1、Brief introduction of Light hydrocarbon gas pressurized Roots blower

Light hydrocarbon gas pressurized Roots blowerthe models are complete and can meet the needs of different users for different purposes.，Gas is compressed and transported based on the relative motion of two lobed rotors in the cylinder.，it is widely used in manufacturing industry, aquaculture, pneumatic transport, coal chemical industry, power and other industries，be loved by our customers.。

Light hydrocarbon gas pressurized Roots blower

2、Light hydrocarbon gas pressurized Roots blower function

Light hydrocarbon gas pressurized Roots blowermultifunctional, with functions such as dehydrate, aeration, dry, aquaculture and material fluidization，is an efficient volumetric gas conveying and pressurizing equipment.，is a common Light hydrocarbon gas pressurized Roots blower，it is an ideal choice for customers to buy Light hydrocarbon gas pressurized Roots blower。

Light hydrocarbon gas pressurized Roots blower

3、Light hydrocarbon gas pressurized Roots blower structure composition

The Light hydrocarbon gas pressurized Roots blower has the following structure

1. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

2. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

3. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

4. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

5. impeller

It is the rotating part of the Light hydrocarbon gas pressurized Roots blower, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Light hydrocarbon gas pressurized Roots blower has gradually replaced the two-leaf Light hydrocarbon gas pressurized Roots blower.

Light hydrocarbon gas pressurized Roots blower

4、Video analysis of Light hydrocarbon gas pressurized Roots blower

On-site aerial photography of Light hydrocarbon gas pressurized Roots blower。

Light hydrocarbon gas pressurized Roots blower

As you can see from the live video.，Shandong Haide Fenti Engineering Co., Ltd. it has the characteristics of convenient maintenance, be of simple construction, low noise, durable performance and stable and reliable。

5、Light hydrocarbon gas pressurized Roots blower quotation

The Light hydrocarbon gas pressurized Roots blower price is introduced as follows:

1. marketing channel

Each manufacturer's sales model is different, and the preferential degree of products is also different. Some manufacturers adopt the mode of "thin profit and quick turnover", and the price is relatively cheap. Some manufacturers sell their products at high prices to earn high profits. When purchasing products, they must compare the prices to avoid being cheated.

2. market factors

Market supply and demand is the inevitable law of market development, with more market supply, less demand and lower product prices; The market supply is small, and people's demand is large. "Things are scarce and expensive", the product price will increase accordingly, and the price of hyde powder Light hydrocarbon gas pressurized Roots blower will also conform to this market law.

3. Manufacturer's strength

Direct selling by manufacturers and sales by middlemen will also affect product prices. There are not too many links among direct selling products, so the cost required by manufacturers is low, and the price of Light hydrocarbon gas pressurized Roots blower is low. Customers can also put products into production in advance. On the contrary, when purchasing products from middlemen, there are not only many links, but also the price of Light hydrocarbon gas pressurized Roots blower is much higher, so customers should choose products directly sold by manufacturers when purchasing.

4. select a qualified person

Different manufacturers have different material selection standards. The better the quality of the selected materials, the more expensive the products will be. On the contrary, the prices will be low. However, to avoid customers being deceived, compare several products of the same specification and model before deciding to purchase.

5. Configuration difference

Configuration refers to the hardware composition of the product, which mainly includes material selection, parts selection, etc. The higher the overall configuration of the product, the higher the price of the Light hydrocarbon gas pressurized Roots blower, which is beyond doubt. hyde makes every product with great care in the attitude of being highly responsible to customers, so the price of hyde powder Light hydrocarbon gas pressurized Roots blower is reasonable for products with the same configuration.

Light hydrocarbon gas pressurized Roots blower

6、hyde delivery site

The following is the live video of Light hydrocarbon gas pressurized Roots blower designed and produced by hyde powder for users, from which we can see the the advantage is In the process of air intake and exhaust, the Light hydrocarbon gas pressurized Roots blower will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.、Due to the adoption of synchronous gear transmission and small gap design, the Light hydrocarbon gas pressurized Roots blower runs stably and reliably, without contact and wear parts, and has a long service life.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Light hydrocarbon gas pressurized Roots blower less vibration and noise.、Because of the design of three-blade rotor, the Light hydrocarbon gas pressurized Roots blower has little vibration and low noise during operation, and the operation is stable and reliable、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise. of Light hydrocarbon gas pressurized Roots blower.。

Light hydrocarbon gas pressurized Roots blower

As you can see from the live video.hyde The overall structural design is simple, diverse and beautiful.，it has the structure of fuel tank, rotator, bearing, impeller and fuel tank。

Light hydrocarbon gas pressurized Roots blowerin the course of work,It mainly depends on the relative movement of two lobed rotors (usually three-bladed impellers) in the cylinder to compress and transport gas.，the product looks beautiful.。