Introduction to Gas conveying Roots blower and blower structure principle

Gas conveying Roots bloweris a positive displacement blower with forced gas transmission characteristics.，is a kind of high quality and low price Gas conveying Roots blower，Structure consists of case, bearing, wallboard, fuel tank, rotator and so on。The following is to introduce the Gas conveying Roots blower:

1、Brief introduction of Gas conveying Roots blower

Gas conveying Roots bloweris a positive displacement blower with forced gas transmission characteristics.，it has the functions of ventilation, cool, aeration, pick up the suction and sewage disposal，It has the functions of material handling, dehydrate, dry, sewage disposal and exhaust emission，support customization。

Gas conveying Roots blower

2、Gas conveying Roots blower use

Gas conveying Roots blowerIt can be used for aeration, mix, pick up the suction, cool, Ventilation, supply air and so on，at runtime,Gas is compressed and transported based on the relative motion of two lobed rotors in the cylinder. When the two rotors rotate, the volume between them changes constantly, thus realizing the suction, compression and discharge of gas.，it has the functions of dry, material fluidization, mix, pressurized transportation and material handling，has been favored by more and more customers.。

Gas conveying Roots blower

3、Gas conveying Roots blower use

Gas conveying Roots blowerWidely used inaquaculture,Pressurized transportation,Desulfurization oxidation,aquaculture,dehydrate and so on，the product looks beautiful.，is a common Gas conveying Roots blower，at the start of the operation,The gas is compressed and transported by the relative rotation of a pair of trilobal rotors in the cylinder. Each trilobal rotor is supported by two bearings, and the relative position of the two rotors is always kept constant by using a pair of synchronous gears. During the rotation of the rotor, there are tiny gaps between impeller and impeller, impeller and casing, impeller and side cover, so there is no friction in the working chamber and no lubrication is needed, thus realizing the smooth transportation of gas.，Because of the design of three-blade rotor, the Gas conveying Roots blower has little vibration and low noise during operation, and the operation is stable and reliable、Small size and small floor space make it easy to arrange and install in places with limited space.、Due to the adoption of synchronous gear transmission and small gap design, the Gas conveying Roots blower runs stably and reliably, without contact and wear parts, and has a long service life.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Gas conveying Roots blower perform well in many situations where stable airflow is needed.、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.。

Gas conveying Roots blower

4、Structural characteristics of Gas conveying Roots blower

The Gas conveying Roots blower structure is introduced as follows:

1. impeller

It is the rotating part of the Gas conveying Roots blower, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Gas conveying Roots blower has gradually replaced the two-leaf Gas conveying Roots blower.

2. muffler

Used to reduce the noise caused by airflow pulsation when the Gas conveying Roots blower enters and exits.

3. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

4. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

5. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the Gas conveying Roots blower, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

Gas conveying Roots blower

5、Introduction of advantages of Gas conveying Roots blower

Gas conveying Roots blowers have the following advantages.

1. Durable performance

Impeller and shaft are integrated structure, and the impeller is not worn, so the performance of the fan is durable and can run continuously for a long time.

2. Convenient maintenance

The structure of the Gas conveying Roots blower is relatively simple and easy to maintain.

3. Stable air output

Due to the design of three-blade rotor, the Gas conveying Roots blower has little vibration and low noise during operation, and the operation is stable and reliable.

4. energy-efficient

The Gas conveying Roots blower has high efficiency and can realize gas transportation and pressurization with low energy consumption.

5. Wide application range

Widely used in many fields, such as commodity industry, etc., it is more suitable for gas transportation and pressurization systems in low-pressure occasions, and can also be used as vacuum pumps.

Gas conveying Roots blower

6、company strength

The company has many years of Gas conveying Roots blower manufacturing experience, large scale and strong strength.。

hyde

Gas conveying Roots bloweris a positive displacement blower.，widely used inchemical fertilizer,Flue gas treatment,port,aquaculture,petrochemical industry and other industries，the main structure includes muffler, impeller, case, impeller, muffler and so on，productSimple structure and reliable operation.。