Introduction to Energy saving high-pressure Roots blower, introduction to Three leaf Roots blower function advantages and characteristics

Energy saving high-pressure Roots bloweris a double impeller synchronous compression machine, belonging to a positive displacement blower.。The following is to introduce the Energy saving high-pressure Roots blower:

1、Brief introduction of Energy saving high-pressure Roots blower

Energy saving high-pressure Roots bloweris a device that generates positive pressure or negative pressure through the relative rotation of two impellers, thus compressing and conveying gas.，Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.、Small size and small floor space make it easy to arrange and install in places with limited space.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Energy saving high-pressure Roots blower perform well in many situations where stable airflow is needed.、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、Small size and small floor space make it easy to arrange and install in places with limited space.，is a Energy saving high-pressure Roots blower。

Energy saving high-pressure Roots blower

2、Energy saving high-pressure Roots blower principle

Energy saving high-pressure Roots blowerat work,The two three-blade impellers rotate relatively in the space sealed by the casing and the wallboard. Each impeller adopts the envelope of involute or epicycloid, the three blades of each impeller are exactly the same, and the two impellers are also exactly the same, which greatly reduces the machining difficulty. During the rotation of the impeller, air enters the air inlet cavity under the action of atmospheric pressure, and then two blades of each impeller, the wallboard and the casing form a sealed cavity. During the rotation of the impeller, the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades, and because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out, so that the air is continuously transported from the air inlet to the air outlet.，It has a wide range of uses, including mix, Material fluidization, material handling, aquaculture and pick up the suction，it has the characteristics of wide application range, convenient manufacture, low noise, convenient maintenance and stable and reliable。

Energy saving high-pressure Roots blower

3、Energy saving high-pressure Roots blower structure

The Energy saving high-pressure Roots blower structure is introduced as follows:

1. muffler

Used to reduce the noise caused by airflow pulsation when the Energy saving high-pressure Roots blower enters and exits.

2. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

3. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

4. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

5. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

Energy saving high-pressure Roots blower

4、Introduction of Energy saving high-pressure Roots blower characteristics

Energy saving high-pressure Roots blowerlow noise,smooth operation,energy-efficient,wide application range,economical and durable，it is usually composed of fuel tank, bearing, muffler, case and impeller，is a positive displacement blower.，was developed and designed by hyde。

Energy saving high-pressure Roots blower

5、Energy saving high-pressure Roots blower HD picture

Overview of high-definition pictures,the product looks atmospheric.。

Energy saving high-pressure Roots blower

Note: All the pictures in this article were taken by hyde powder manufacturer.。

Energy saving high-pressure Roots blowerIt has a wide range of uses, including dry, Desulfurization oxidation, Pressurized transportation, Ventilation and exhaust emission，is a popular Energy saving high-pressure Roots blower，The structure is novel, special, advanced, reasonable and scientific.，it has the structure of wallboard, impeller, fuel tank, muffler and rotator。