Introduction to Dense high-pressure Roots blower, introduction to Three leaf Roots blower advantages and characteristics

Dense high-pressure Roots blowerthe models are complete and can meet the needs of different users for different purposes.，it has the functions of material fluidization, pick up the suction, aeration, supply air and pressurized transportation，The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Dense high-pressure Roots blower less vibration and noise.、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、In the process of air intake and exhaust, the Dense high-pressure Roots blower will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.、Due to the adoption of synchronous gear transmission and small gap design, the Dense high-pressure Roots blower runs stably and reliably, without contact and wear parts, and has a long service life.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Dense high-pressure Roots blower perform well in many situations where stable airflow is needed.，it is mainly composed of impeller, muffler, wallboard, rotator and fuel tank，is based on hyde is a Dense high-pressure Roots blower newly developed by hyde。

1、Brief introduction of Dense high-pressure Roots blower

Dense high-pressure Roots bloweris a positive displacement blower with forced gas transmission characteristics.，reliable quality，favorable price。

Dense high-pressure Roots blower

2、Dense high-pressure Roots blower video live broadcast

The following is the live video of Dense high-pressure Roots blower designed and produced by hyde powder for users, from which we can see the Because of the design of three-blade rotor, the Dense high-pressure Roots blower has little vibration and low noise during operation, and the operation is stable and reliable、Small size and small floor space make it easy to arrange and install in places with limited space.、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.、Due to the adoption of synchronous gear transmission and small gap design, the Dense high-pressure Roots blower runs stably and reliably, without contact and wear parts, and has a long service life.、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation. of Dense high-pressure Roots blower.。

Dense high-pressure Roots blower

As you can see from the live video.，Shandong Haide Fenti Engineering Co., Ltd. widely used inDust removal,Textile light textile,port,sewage disposal,Flue gas treatment and other industries。

3、Structural characteristics of Dense high-pressure Roots blower

The Dense high-pressure Roots blower has the following structure

1. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

2. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

3. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

4. impeller

It is the rotating part of the Dense high-pressure Roots blower, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Dense high-pressure Roots blower has gradually replaced the two-leaf Dense high-pressure Roots blower.

5. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the Dense high-pressure Roots blower, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

Dense high-pressure Roots blower

4、Advantages of Dense high-pressure Roots blower principle

Dense high-pressure Roots blowerthe principle is simple.When the motor drives one impeller to rotate, the other impeller will rotate synchronously at the same speed and in the opposite direction under the action of the synchronous gear. In the process of rotation, because the gaps between impeller and impeller, impeller and casing, impeller and wallboard are very small, a vacuum state is formed at the air inlet, and air is sucked into the air inlet cavity under the action of atmospheric pressure. As the impeller continues to rotate, two blades of each impeller, the wallboard and the casing form a sealed cavity, and the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades. Because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out. After continuous inhalation and extrusion, air is continuously transported from the air inlet to the air outlet, completing the whole gas transportation process.，it is usually composed of muffler, wallboard, bearing, impeller and case，productSimple structure and advanced technology.，it is widely used in building materials, manufacturing industry, Pharmaceutical and chemical industries, pneumatic transport, petrochemical industry and other industries。

Dense high-pressure Roots blower

5、Dense high-pressure Roots blower price concessions

The Dense high-pressure Roots blower price is introduced as follows:

1. Service factor

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Dense high-pressure Roots blower price and service can meet the actual needs of customers.

2. Reasonable cost

The cost of manufacturing Dense high-pressure Roots blower varies from manufacturer to manufacturer. The higher the cost of manufacturing products, the higher the product price will be. On the other hand, the lower the production cost, the lower the product price, but the quality of products with high production cost is guaranteed, which can reduce the maintenance cost of customers.

3. regional advantages

The consumption level will be different in different regions. When pricing equipment, many manufacturers often set the price according to the consumption level of the region. If the consumption level is high, the price will be correspondingly high, otherwise, the price will be very low.

4. model

The same type of products, with different specifications, models and sizes, have different costs, so the quotations to customers naturally vary. Generally speaking, the larger the model, the higher the price, and the smaller the model, the lower the price.

5. quality factor

Generally speaking, the higher the product quality, the higher the Dense high-pressure Roots blower price. A reasonable balance is made between quality and price, so that the comprehensive quality of the product can meet the customer's use standards and meet the basic needs of customers in terms of price.

Dense high-pressure Roots blower

6、hyde's strength

The company has many years of Dense high-pressure Roots blower manufacturing experience, large scale and strong strength.。

hyde powder

Dense high-pressure Roots blowerin the course of work,Gas is compressed and transported based on the relative motion of two lobed rotors in the cylinder.，the main features are low noise, convenient manufacture, run smoothly, stable and reliable and durable performance，the product looks atmospheric.。