Introduction to Slag conveying system and Powder pneumatic conveying structure principle

Slag conveying systemis a technical integrated material conveying system that uses air (or gas) flow as conveying power to convey bulk solid materials in pipelines.，multifunctional, with functions such as Automatic control, Environmental protection and pollution-free, Closed conveying, Physical processing assistance and material handling，at work,Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline.，the product looks atmospheric.，has been favored by more and more customers.。

1、Brief introduction of Slag conveying system

Slag conveying systemthat is, the technology of conveying granular materials in closed pipes by air flow.，it has the structure of Air source system, dust pelletizing system, Bunker system, delivery system and Conveying pipeline system，This productSimple structure and advanced technology.，Widely used in Reduce pollution, Dust removal and essence, Long-distance and multipoint transportation, Process assistance and Reduce pollution，low in price，be of high quality。

Slag conveying system

2、Functional advantages of Slag conveying system

Slag conveying systems have the following advantages.

1. Environmental protection and pollution-free

The whole process of the Slag conveying system system is carried out in a closed state, so the secondary pollution of materials during transportation can be avoided.

2. be simple in structure

The structure is relatively simple and the operation is very convenient. It can be transported flexibly in horizontal, vertical or inclined directions to adapt to different production environments.

3. The quality of convey materials is ensure.

In the process of conveying, the Slag conveying system can prevent the materials from getting wet, soiled or mixed with other impurities, thus ensuring the quality of the conveyed materials. This is especially important for some industries that require high material quality.

4. Small floor space

Compared with the traditional mechanical transportation mode, the equipment and pipelines required by the Slag conveying system occupy a smaller area, which can make full use of the space and reduce the construction cost and floor space of the factory building.

5. Multi-point to multi-point transportation

The Slag conveying system system can realize multi-point to multi-point transportation, meet the needs of different production lines and improve the production flexibility.

Slag conveying system

3、Slag conveying system working site

On-site aerial photography of Slag conveying system。

Slag conveying system

As you can see from the live video.，hyde at the start of the operation,Using the dynamic pressure and static pressure of air, the material particles are suspended in the airflow or transported in groups along the pipeline. The former is called material suspension transportation, and the latter is called material group transportation.。

4、Slag conveying system application

Slag conveying systems have the following purposes.

1. Heating, cooling and drying

Heating, cooling or drying equipment can be installed in the Slag conveying system pipeline to carry out necessary treatment of materials to meet the specific requirements in the production process.

2. Long-distance and multipoint transportation

The Slag conveying system system can realize long-distance material transportation and meet the demand of long-distance material transfer. At the same time, it can also realize multi-point transportation, that is, materials are collected from multiple locations and transported to a centralized point, or materials are dispersed from a centralized point to multiple locations. This flexibility makes Slag conveying systems have important application value in large factories and cross-regional material transportation.

3. Dust removal and purification

The Slag conveying system system is usually equipped with a dust collector to collect and treat the dust generated in the transportation process to keep the production environment clean and hygienic.

4. Multi-point transportation

The Slag conveying system system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

5. Long distance transportation

The Slag conveying system system can realize long-distance material transportation and meet the demand of long-distance material transfer. This is especially important for some large factories or cross-regional material transportation.

Slag conveying system

5、Slag conveying system function

Slag conveying systemit has the functions of Explosion-proof involves, Automatic control, material handling, Explosion-proof involves and Closed conveying，structure mainly includes: control system, Air source system, delivery system, Bunker system, control system and so on，it has the characteristics of High reliability, be of simple construction, automation, Quantitative transportation and Save manpower，has been favored by more and more customers.。

Slag conveying system

6、hyde powder company discount

Slag conveying system is a new type of Powder pneumatic conveying introduced by Shandong Haide Fenti Engineering Co., Ltd. manufacturer, which has a wide range of applications, complete structural design and high working efficiency. It is an ideal equipment for medicine and other industries. Now consult Slag conveying system, you can enjoy the discount, and there are many activities for you, such as full reduction and full reduction。

hyde

Slag conveying systemin the course of work,Air flow is generated by compressed air or other gases, and a certain air flow speed and pressure are formed in the pipeline. These air currents suspend the material particles in it, or transport the materials along the pipeline in a group state. In this process, the material particles are in a liquid state under the action of airflow, so as to realize the continuous and stable transportation of materials.，It can be used for Dust removal and essence, Multi-point transportation, Mixing and classification, Long distance transportation, material handling, Environmental protection and cleaner production and so on。