Introduction to Dust and ash pneumatic conveying system, how much is the price of the pneumatic conveying system?

Dust and ash pneumatic conveying systemmainly uses the airflow generated by the fan to transport materials along the airflow direction in the closed conveying pipeline.，super quality and competitive price。

1、Brief introduction of Dust and ash pneumatic conveying system

Dust and ash pneumatic conveying systemis a conveying technology that uses the energy of airflow to convey granular materials along the airflow direction in a closed pipeline.，features include Safe and reliable, Easy to use, High system reliability, automation and High production efficiency，usually used in heat-engine plant, building materials, environmental protection, grain processing, pharmaceutical factory and other fields，it has the functions of Environmental protection and pollution-free, Physical processing assistance, Automatic control, Closed conveying and Explosion-proof involves，is a popular Dust and ash pneumatic conveying system。

Dust and ash pneumatic conveying system

2、Introduction of advantages of Dust and ash pneumatic conveying system

The advantages of Dust and ash pneumatic conveying system are as follows:

1. be of simple construction

The structure is relatively simple and the operation is very convenient. It can be transported flexibly in horizontal, vertical or inclined directions to adapt to different production environments.

2. energy saving and environmental protection

In the process of Dust and ash pneumatic conveying system opening, dust pollution and noise pollution will hardly occur, which is more environmentally friendly than traditional mechanical transportation.

3. Convenient maintenance and easy automation.

Although the initial investment of Dust and ash pneumatic conveying system system may be high, its maintenance cost is relatively low. Because the equipment has simple structure and few moving parts, it is convenient to maintain and has low cost. In addition, after long-term operation, its efficient and stable conveying performance will also bring remarkable economic benefits to enterprises.

4. Save space

Compared with the traditional mechanical conveying mode, the Dust and ash pneumatic conveying system system can save a lot of mechanical equipment and conveying pipes, thus saving a lot of space.

5. Generality

The Dust and ash pneumatic conveying system system can transport a variety of materials, including powdery, granular, fibrous and small block materials, and has strong adaptability. At the same time, for materials with unstable chemical properties, inert gas can also be used for transportation to ensure the stability of materials during transportation.

Dust and ash pneumatic conveying system

3、Structural advantages of Dust and ash pneumatic conveying system

The Dust and ash pneumatic conveying system has the following structure

1. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Dust and ash pneumatic conveying system system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

2. control system

The control system is the "brain" of the Dust and ash pneumatic conveying system system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

3. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

4. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Dust and ash pneumatic conveying system system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

5. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

Dust and ash pneumatic conveying system

4、Dust and ash pneumatic conveying system structure

The Dust and ash pneumatic conveying system has the following structure

1. control system

The control system is the "brain" of the Dust and ash pneumatic conveying system system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

2. Air source device

The air source device is the power core of the Dust and ash pneumatic conveying system system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

3. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

4. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

5. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Dust and ash pneumatic conveying system system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

Dust and ash pneumatic conveying system

5、Dust and ash pneumatic conveying system use

The purpose of Dust and ash pneumatic conveying system is introduced as follows:

1. Multi-point transportation

The Dust and ash pneumatic conveying system system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

2. Dust removal and purification

The Dust and ash pneumatic conveying system system is usually equipped with a dust collector to collect and treat the dust generated in the transportation process to keep the production environment clean and hygienic.

3. Reduce pollution

The Dust and ash pneumatic conveying system system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

4. Mixing and classification

In the process of conveying, the Dust and ash pneumatic conveying system system can cooperate with other equipment to realize the mixing and grading operation of materials, and improve the production efficiency and product quality.

5. Bulk material transportation

The Dust and ash pneumatic conveying system is especially suitable for conveying powdery, granular and flowable bulk materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, pharmaceutical powder, etc. Through the Dust and ash pneumatic conveying system, these materials can be efficiently transferred between different production links or equipment.

Dust and ash pneumatic conveying system

6、Dust and ash pneumatic conveying system HD picture real shot

Different specifications and models of high-definition pictures, so that everyone can see enough at once.。

Dust and ash pneumatic conveying system

Note: All the pictures in this article were taken by hyde manufacturer.。

Dust and ash pneumatic conveying systemis a technology that uses the energy of airflow to transport granular materials along the direction of airflow in a closed pipeline.，it is widely used in metallurgy, plastic, building material, chemical plant and machine building。