What is a Metal particle conveying equipment? pneumatic conveying system specifications, models, and parameters

Metal particle conveying equipmentis a concrete application of fluidization technology to transport granular materials along the direction of airflow in a closed pipeline by using the energy of airflow.，the advantage is The material is completely closed in the whole conveying process.，Less dust flying and spilling, good environmental sanitation conditions, complete sealing and pollution-free transportation.、In the process of transportation, various technological operations can be carried out at the same time, such as physical and chemical processes such as be broken.、Flexible pipeline layout, closed pipeline can be adjusted according to production conditions, which is relatively flexible.、Can be charged at one place, and then discharged at multiple places, and realize remote operation.、Closed pipeline transportation，It can prevent the transported materials from being affected with damp, soiled or mixed with foreign matters, and it is completely sealed and pollution-free to transport.，It is mostly used in material handling, Dust removal and essence, Bulk material transportation, Long distance transportation, Heating, cooling and drying, Mixing and classification and so on，is based on hyde is an advanced Metal particle conveying equipment developed by our company in combination with the actual situation of the industry。The following is to introduce the Metal particle conveying equipment:

1、Brief introduction of Metal particle conveying equipment

Metal particle conveying equipmentis a kind of material conveying system which uses the energy of airflow to convey granular or powdery materials along the airflow direction in a closed pipeline.，it is widely used inchemical industry,build a ship,chemical plant,heat-engine plant,medicine and other industries。

Metal particle conveying equipment

2、Structural advantages of Metal particle conveying equipment

The Metal particle conveying equipment has the following structure

1. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

2. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

3. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

4. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Metal particle conveying equipment system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

5. control system

The control system is the "brain" of the Metal particle conveying equipment system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

Metal particle conveying equipment

3、Metal particle conveying equipment customer scene picture

The beauty of Metal particle conveying equipment comes from the detail design.。

Metal particle conveying equipment

Note: All the pictures in this article were taken by hyde powder manufacturer.。

4、Introduction of advantages of Metal particle conveying equipment

The advantages of Metal particle conveying equipment are as follows:

1. Efficient continuous transportation

The Metal particle conveying equipment system can transport materials continuously and stably, and the transportation speed is fast, which greatly improves the production efficiency and transportation capacity. Compared with other transportation modes, such as mechanical transportation or manual handling, Metal particle conveying equipments can significantly reduce the stagnation time of materials in the transportation process and speed up the production process.

2. structure

Metal particle conveying equipment has simple structure and convenient operation.

3. Various process operations can be realized.

While conveying materials, the Metal particle conveying equipment system can also complete a variety of production processes, such as mixing, crushing, grading, drying, cooling, etc., which improves production efficiency and added value of products.

4. High degree of automation

The Metal particle conveying equipment system is easy to realize automatic control, and can be operated and monitored remotely through the central console, which reduces the labor cost and improves the production efficiency and management convenience.

5. Wide application range

A conveying system can convey different kinds of products at different times. In fact, all powders and particles can be transported by the Metal particle conveying equipment.

Metal particle conveying equipment

5、Metal particle conveying equipment characteristics

Metal particle conveying equipmentfeatures include Easy to use, Convenient maintenance, Flexible pipeline layout, Long conveying distance and It is convenient to realize mechanization，be loved by our customers.。

Metal particle conveying equipment

6、How much is the Metal particle conveying equipment?

The Metal particle conveying equipment price is introduced as follows:

1. company strength

hyde is a self-produced and self-sold Metal particle conveying equipment, and has rich experience in the production and manufacturing of Metal particle conveying equipment. In the process of production and manufacturing, there is less waste of resources, and the corresponding product prices are also low.

2. model

Because the specifications and models of products are different, their specifications and configurations are not the same. As we all know, the cost of products with high configuration will be higher, and vice versa, because there is a close relationship between product sales price and specifications and models.

3. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

4. geographical position

hydejinan, the transportation is convenient, and the corresponding cost of transporting Metal particle conveying equipment is low, which reduces the cost of selling Metal particle conveying equipment by manufacturers, and the price will also decrease.

5. service

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Metal particle conveying equipment price and service can meet the actual needs of customers.

Metal particle conveying equipment

Metal particle conveying equipmentit is widely used in transportation, machine building, cast, building material, grain processing and other industries，it has the structure of Bunker system, Air source system, control system, Bunker system and dust pelletizing system，This Metal particle conveying equipmentThe overall structural design is relatively simple，is a Metal particle conveying equipment。