What is a Foam particle pneumatic conveying system? pneumatic conveying specifications, models, and parameters

Foam particle pneumatic conveying systemis a material conveying system which uses the energy of airflow to convey granular materials in a closed pipeline.，features include Simple system, Wide range of conveying materials, Centralized transportation, automation and High system reliability，the main structure includes control system, Air source system, control system, Conveying pipeline system, dust pelletizing system and so on，The conveying system is closed, which can prevent the materials from being affected with damp, soiled and mixed with other sundries in the conveying process, and ensure the conveying quality of the materials.、In the process of conveying, various technological operations can be carried out at the same time, such as grade.、The material is completely closed in the whole conveying process.，Reduce the diffusion of its dust in the air, fully sealed and pollution-free transportation.、Materials collected from several points can be sent to one place or one place to scattered points.、The operation mode is flexible and changeable, and it can run continuously or regularly.，meet the needs of material transportation，can be customized according to user's needs.。

1、Brief introduction of Foam particle pneumatic conveying system

Foam particle pneumatic conveying systemis a method of conveying materials through pipelines by using air flow with a certain speed.，Flexible pipeline layout,Reliable equipment,Convenient operation and management,Save manpower,Low energy consumption，is based on hyde powder is a Foam particle pneumatic conveying system newly developed by hyde powder。

Foam particle pneumatic conveying system

2、Foam particle pneumatic conveying system characteristics

Foam particle pneumatic conveying systemthe main features are Easy to use, convenient to use, Convenient for material transportation and recovery., The conveying speed is faster and Easy to automate management。

Foam particle pneumatic conveying system

3、Structural characteristics of Foam particle pneumatic conveying system

The Foam particle pneumatic conveying system structure is introduced as follows:

1. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

2. control system

The control system is the "brain" of the Foam particle pneumatic conveying system system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

3. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

4. Air source device

The air source device is the power core of the Foam particle pneumatic conveying system system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

5. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

Foam particle pneumatic conveying system

4、Foam particle pneumatic conveying system real beat

Foam particle pneumatic conveying system high-definition picture display, all-round shooting without dead ends, for our customers to visit.。

Foam particle pneumatic conveying system

Note: All the pictures in this article were taken by hyde manufacturer.。

5、Foam particle pneumatic conveying system price

The Foam particle pneumatic conveying system price is introduced as follows:

1. service

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Foam particle pneumatic conveying system price and service can meet the actual needs of customers.

2. After-sales service level

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, hyde Foam particle pneumatic conveying system manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Foam particle pneumatic conveying system price can meet the purchasing needs of customers.

3. geographical position

There are differences in consumption levels in different regions, which directly affect the production and manufacturing costs of products. Generally speaking, the higher the consumption level, the higher the cost of producing products, and the higher the product cost, the higher the price naturally.

4. raw material

The higher the cost of materials, the higher the price will be. In the process of purchasing products, users need to make a detailed understanding of the materials selected for products.

5. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

Foam particle pneumatic conveying system

6、company strength

The company has many years of Foam particle pneumatic conveying system manufacturing experience, large scale and strong strength.。

hyde powder

Foam particle pneumatic conveying systemis a kind of material conveying equipment that uses airflow as power to convey materials through pipeline system.，it has the functions of Explosion-proof involves, Physical processing assistance, Environmental protection and pollution-free, material handling and Automatic control。