Introduction to Multi point discharge pneumatic conveying system, pneumatic conveying system advantages, characteristics and principles

Multi point discharge pneumatic conveying systemmainly based on aerodynamic force, granular materials are transported along the airflow direction in a closed pipeline by using the energy of airflow.，it is an ideal choice for customers to buy Multi point discharge pneumatic conveying system。The following is to introduce the Multi point discharge pneumatic conveying system:

1、Brief introduction of Multi point discharge pneumatic conveying system

Multi point discharge pneumatic conveying systemby forming a pressure difference along the pipeline, the air is moved to the area with lower pressure to realize the transportation of bulk materials.。

Multi point discharge pneumatic conveying system

2、Multi point discharge pneumatic conveying system application

Multi point discharge pneumatic conveying systems have the following purposes.

1. Multi-point transportation

The Multi point discharge pneumatic conveying system system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

2. save energy and cut emissions

Although the Multi point discharge pneumatic conveying system system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

3. material handling

Multi point discharge pneumatic conveying system system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

4. Reduce pollution

The Multi point discharge pneumatic conveying system system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

5. Environmental protection and cleaner production

The Multi point discharge pneumatic conveying system process is carried out in a closed pipeline, which effectively prevents dust from flying and leaking, thus reducing environmental pollution and harm to employees' health. This is especially important for industries that need to maintain high cleanliness or dust-free environment.

Multi point discharge pneumatic conveying system

3、Multi point discharge pneumatic conveying system performance advantage

Multi point discharge pneumatic conveying systems have the following advantages.

1. Convenient maintenance and easy automation.

The Multi point discharge pneumatic conveying system device has the advantages of simple structure, few moving parts, convenient maintenance and reduced maintenance cost. At the same time, the equipment occupies a small area and can make full use of space.

2. Easy to maintain

The Multi point discharge pneumatic conveying system system has relatively few moving parts, which makes the maintenance more convenient. At the same time, due to its structural characteristics, the system is easy to realize automatic control, which improves production efficiency and management convenience.

3. structure

Multi point discharge pneumatic conveying system has simple structure and convenient operation.

4. High degree of automation

The Multi point discharge pneumatic conveying system system is easy to realize automatic control and can be operated through the central console, which reduces the labor cost and improves the production efficiency and management convenience.

5. Multiple process operations can be carried out at the same time

In the process of conveying, the Multi point discharge pneumatic conveying system system can also perform physical operations such as heating, cooling, drying and airflow classification or some chemical operations at the same time, which increases the versatility of the system.

Multi point discharge pneumatic conveying system

4、Multi point discharge pneumatic conveying system real shot picture

The Multi point discharge pneumatic conveying system has been upgraded, and the beauty of details is appreciated.。

Multi point discharge pneumatic conveying system

Note: All the pictures in this article were taken by hyde powder manufacturer.。

5、Multi point discharge pneumatic conveying system principle

Multi point discharge pneumatic conveying systemUsing aerodynamic force, compressed air or other gases form airflow in the pipeline, and the material particles are suspended in the airflow or transported along the pipeline in groups.，It is a product series that integrates material handling, Multi-point transportation, Bulk material transportation, cut down on energy consumption and Long distance transportation，the product looks beautiful.。

Multi point discharge pneumatic conveying system

6、Multi point discharge pneumatic conveying system price

The Multi point discharge pneumatic conveying system price is introduced as follows:

1. Parameter size

There are many specifications and models of Multi point discharge pneumatic conveying system in the market now. Under normal circumstances, the price of large-sized Multi point discharge pneumatic conveying system is definitely higher than that of small-sized Multi point discharge pneumatic conveying system.

2. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

3. technology

The more advanced the technology, the higher the price will be, otherwise the equipment price will be low, and users must pay attention to whether their own technology meets the production requirements when purchasing equipment.

4. company strength

The products manufactured by manufacturers of different scales are also different. Large-scale manufacturers have advanced production technology, the quality of products manufactured is reliable, and large-scale manufacturers have perfect after-sales service, which can provide greater protection for customers and the products manufactured are more cost-effective. Therefore, customers should try to choose large manufacturers to purchase.

5. market quotation

Market supply and demand is the main objective factor to determine the price, and the imbalance between supply and demand affects the price change. Generally speaking, when the Multi point discharge pneumatic conveying system market is in short supply, its price will increase relatively; On the contrary, when the supply exceeds the demand, it also indicates that the competition among manufacturers is fierce. In order to better improve the visibility of manufacturers and occupy a more favorable market position, manufacturers will generally lower their prices appropriately; Only when the market supply and demand reach a balanced state can its normal price be realized.

Multi point discharge pneumatic conveying system

Multi point discharge pneumatic conveying systemis a kind of high quality and low price Multi point discharge pneumatic conveying system，it has the characteristics of Convenient maintenance, Operation safety, Easy to automate management, Economic and environmental protection and Reliable equipment，at the start of the operation,Using the dynamic pressure and static pressure of air, the material particles are suspended in the airflow or transported in groups along the pipeline. The former is called material suspension transportation, and the latter is called material group transportation.。