Introduction to Bag breaking pneumatic conveying equipment, pneumatic conveying advantages, characteristics and principles

Bag breaking pneumatic conveying equipmentis a process of transporting bulk materials from one or more sources to one or more destinations by using airflow as a transport medium.，it has been widely used in cast, environmental protection, plastic, medicine, metallurgy and other industries，the principle is simple.Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline. In the process of transportation, gas-solid separator (such as dust collector) is used to separate materials from air to ensure the quality of transported materials.，is a Bag breaking pneumatic conveying equipment newly developed by hyde powder。

1、Brief introduction of Bag breaking pneumatic conveying equipment

Bag breaking pneumatic conveying equipmentis a technology that uses the energy of airflow to transport granular materials along the airflow direction in a closed pipeline.，it has the structure of Bunker system, delivery system, Air source system, control system and dust pelletizing system，This productThe overall structural design is simple and novel.。

Bag breaking pneumatic conveying equipment

2、Bag breaking pneumatic conveying equipment application

Bag breaking pneumatic conveying equipments have the following purposes.

1. save energy and cut emissions

Although the Bag breaking pneumatic conveying equipment system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

2. Reduce pollution

The Bag breaking pneumatic conveying equipment system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

3. Process assistance

In some production processes, Bag breaking pneumatic conveying equipments are not only used for conveying materials, but also as part of the process. For example, in the chemical and pharmaceutical industries, the Bag breaking pneumatic conveying equipment system can cooperate with other equipment to realize process operations such as mixing, grading, drying and cooling of materials, and improve production efficiency and product quality.

4. cut down on energy consumption

Although the power consumption of the Bag breaking pneumatic conveying equipment is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

5. Environmental protection and cleaner production

The Bag breaking pneumatic conveying equipment process is carried out in a closed pipeline, which effectively prevents dust from flying and leaking, thus reducing environmental pollution and harm to employees' health. This is especially important for industries that need to maintain high cleanliness or dust-free environment.

Bag breaking pneumatic conveying equipment

3、Structural characteristics of Bag breaking pneumatic conveying equipment

The Bag breaking pneumatic conveying equipment has the following structure

1. control system

The control system is the "brain" of the Bag breaking pneumatic conveying equipment system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

2. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

3. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

4. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Bag breaking pneumatic conveying equipment system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

5. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

Bag breaking pneumatic conveying equipment

4、Functional advantages of Bag breaking pneumatic conveying equipment

Bag breaking pneumatic conveying equipments have the following advantages.

1. Multiple process operations can be carried out at the same time

In the process of conveying, the Bag breaking pneumatic conveying equipment system can also perform physical operations such as heating, cooling, drying and airflow classification or some chemical operations at the same time, which increases the versatility of the system.

2. Small floor space

Compared with other transportation modes, the Bag breaking pneumatic conveying equipment system occupies a small area and can make full use of space resources, especially suitable for use in factories or workshops with limited space.

3. The quality of convey materials is ensure.

In the process of conveying, the Bag breaking pneumatic conveying equipment can prevent the materials from getting wet, soiled or mixed with other impurities, thus ensuring the quality of the conveyed materials. This is especially important for some industries that require high material quality.

4. versatility

While conveying materials, the Bag breaking pneumatic conveying equipment system can also complete a variety of production processes, such as mixing, crushing, grading, drying, cooling and so on. This versatility makes the Bag breaking pneumatic conveying equipment more flexible and adaptable in the production process.

5. Save space

Compared with the traditional mechanical conveying mode, the Bag breaking pneumatic conveying equipment system can save a lot of mechanical equipment and conveying pipes, thus saving a lot of space.

Bag breaking pneumatic conveying equipment

5、Bag breaking pneumatic conveying equipment price advantage

The Bag breaking pneumatic conveying equipment price is introduced as follows:

1. Model type

The same product, with different specifications and models, requires different materials and accessories when manufacturing. Moreover, the products with different specifications and models have different performance, and the manufacturers have different production costs, so the prices of products with different specifications and models are also different.

2. technology content

Different manufacturers have different advanced technologies, different production processes and different performances, and the price difference is naturally quite large.

3. raw material

The quality of materials directly determines the cost. The worse the materials are, the lower the cost will be, and the cheaper the price will be. Of course, the materials are better and the cost is higher, so the overall quotation is naturally higher.

4. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Bag breaking pneumatic conveying equipment have more or less differences in price.

5. service

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, hyde Bag breaking pneumatic conveying equipment manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Bag breaking pneumatic conveying equipment price can meet the purchasing needs of customers.

Bag breaking pneumatic conveying equipment

6、hyde powder's after-sales service

Perfect service: In order to improve the service quality and improve the service level, hyde has set up a sound quality management department and a professional after-sales service team, so as to be highly responsible for customers and avoid their worries in the use process.。

hyde powder

Bag breaking pneumatic conveying equipmentthe advantage is Can be fed from one place to many places for decentralized transportation.、Materials are transported in a closed pipeline.，Reduce the diffusion of its dust in the air, fully sealed and pollution-free transportation.、Closed pipeline transportation，It can reduce the pollution to the surrounding environment in the process of transportation, improve the production environment, facilitate safe production, and completely seal and transport without pollution.、Multi-point feeding and multi-point discharging can be realized, and remote operation can be realized.、In the process of conveying, various technological operations can be carried out at the same time, such as mix.，multifunctional, with functions such as Environmental protection and pollution-free, Closed conveying, Explosion-proof involves, Closed conveying and Automatic control。