Introduction to Vacuum feeding and conveying system, introduction to pneumatic conveying system function advantages and characteristics

Vacuum feeding and conveying systemIt uses the energy of airflow to transport powder materials along the airflow direction in a closed pipeline.，is a kind of high quality and low price Vacuum feeding and conveying system，at the start of the operation,Mainly based on aerodynamic force, compressed air or other gases generate airflow, so that material particles are suspended in the airflow or transported in groups along the pipeline. In pressure transportation, high-pressure gas pushes materials to flow along the pipeline; In vacuum transportation, the material is sucked and transported to the target position through the negative pressure environment in the pipeline.，it is an ideal choice for customers to buy Vacuum feeding and conveying system。The following is to introduce the Vacuum feeding and conveying system:

1、Brief introduction of Vacuum feeding and conveying system

Vacuum feeding and conveying systemalso known as airflow transportation, is a way to transport granular materials along the airflow direction in a closed pipeline by using the energy of airflow.。

Vacuum feeding and conveying system

2、Vacuum feeding and conveying system video detail

On-site aerial photography of Vacuum feeding and conveying system。

Vacuum feeding and conveying system

As you can see from the live video.，hyde powder System modularization,Simple operation,System modularization,Reliable operation,Operation safety。

3、Vacuum feeding and conveying system use

The purpose of Vacuum feeding and conveying system is introduced as follows:

1. Reduce pollution

The Vacuum feeding and conveying system system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

2. Multi-point transportation

The Vacuum feeding and conveying system system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

3. material handling

Vacuum feeding and conveying system system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

4. cut down on energy consumption

Although the power consumption of the Vacuum feeding and conveying system is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

5. Process assistance

In some production processes, Vacuum feeding and conveying systems are not only used for conveying materials, but also as part of the process. For example, in the chemical and pharmaceutical industries, the Vacuum feeding and conveying system system can cooperate with other equipment to realize process operations such as mixing, grading, drying and cooling of materials, and improve production efficiency and product quality.

Vacuum feeding and conveying system

4、Structural advantages of Vacuum feeding and conveying system

The Vacuum feeding and conveying system has the following structure

1. Air source device

The air source device is the power core of the Vacuum feeding and conveying system system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

2. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Vacuum feeding and conveying system system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

3. control system

The control system is the "brain" of the Vacuum feeding and conveying system system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

4. Air source device

The air source device is the power core of the Vacuum feeding and conveying system system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

5. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

Vacuum feeding and conveying system

5、Vacuum feeding and conveying system characteristics

Vacuum feeding and conveying systemthe main features are Quantitative transportation, Save manpower, The failure rate is low, Flexible pipeline layout and Convenient maintenance。

Vacuum feeding and conveying system

6、Vacuum feeding and conveying system application

Vacuum feeding and conveying systems have the following purposes.

1. Adapt to complex environment

The Vacuum feeding and conveying system system can adapt to various complex environments and layout requirements. Whether in high temperature, high humidity, corrosive or flammable and explosive environment, the normal operation of the system can be ensured by selecting suitable materials and taking corresponding safety measures. In addition, the Vacuum feeding and conveying system pipes can be flexibly arranged according to the actual situation of the production site, which makes the configuration of factory equipment more reasonable.

2. Dust removal and purification

The Vacuum feeding and conveying system system is usually equipped with a dust collector to collect and treat the dust generated in the transportation process to keep the production environment clean and hygienic.

3. Environmental protection and cleaner production

The Vacuum feeding and conveying system process is carried out in a closed pipeline, which effectively prevents dust from flying and leaking, thus reducing environmental pollution and harm to employees' health. This is especially important for industries that need to maintain high cleanliness or dust-free environment.

4. Bulk material transportation

The Vacuum feeding and conveying system is especially suitable for conveying powdery, granular and flowable bulk materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, pharmaceutical powder, etc. Through the Vacuum feeding and conveying system, these materials can be efficiently transferred between different production links or equipment.

5. Heating, cooling and drying

Heating, cooling or drying equipment can be installed in the Vacuum feeding and conveying system pipeline to carry out necessary treatment of materials to meet the specific requirements in the production process.

Vacuum feeding and conveying system

Vacuum feeding and conveying systemThe conveying system is closed.，It can prevent the transported materials from being affected with damp, soiled or mixed with foreign matters, and it is completely sealed and pollution-free to transport.、In the process of conveying, various technological operations can be carried out at the same time, such as dust.、The materials collected from several points can be sent to one place or one place to scattered points, and remote operation can be realized.、Large conveying capacity, long conveying distance and high conveying quality.、Fully enclosed transportation system, materials are transported in closed pipes.，It can reduce the pollution to the surrounding environment in the process of transportation, improve the production environment, facilitate safe production, and completely seal and transport without pollution.，Mainly based on aerodynamic force, compressed air or other gases generate airflow, so that material particles are suspended in the airflow or transported in groups along the pipeline.，The overall structural design is relatively simple and compact.，Structure consists of dust pelletizing system, Conveying pipeline system, delivery system, Conveying pipeline system, Bunker system and so on。