What is a Powder metering mixing and conveying system? pneumatic conveying system specifications, models, and parameters

Powder metering mixing and conveying systemis a technology that uses the energy of airflow to transport granular materials along the direction of airflow in a closed pipeline.，super quality and competitive price。

1、Brief introduction of Powder metering mixing and conveying system

Powder metering mixing and conveying systemis a concrete application of fluidization technology to transport granular materials along the direction of airflow in a closed pipeline by using the energy of airflow.，is a common Powder metering mixing and conveying system，Not only can materials be transported from multiple feed points to the discharge point in turn, but also materials can be transported from multiple feed points to the discharge point at the same time, and remote operation can be realized.、The materials are completely sealed during transportation.，Can reduce the pollution to the surrounding environment during transportation, and is fully sealed and pollution-free for transportation.、The operation mode is flexible and changeable, and it can run continuously or regularly.、Fully enclosed transportation system, materials are transported in closed pipes.，It can reduce the pollution to the surrounding environment in the process of transportation, improve the production environment, facilitate safe production, and completely seal and transport without pollution.、High conveying speed, good conveying quality and high conveying efficiency.，meet the needs of material transportation，it is mainly composed of Air source system, delivery system, dust pelletizing system, dust pelletizing system and control system，features include Flexible transmission line, Easy to use, Simple operation, automation and Large conveying capacity。

Powder metering mixing and conveying system

2、Powder metering mixing and conveying system advantage

The advantages of Powder metering mixing and conveying system are as follows:

1. Environmental protection and pollution-free

Because the Powder metering mixing and conveying system is carried out in a closed pipeline, the loss and pollution of materials during transportation can be effectively reduced. This not only improves the utilization rate of materials, but also reduces the production cost.

2. Easy to maintain

The Powder metering mixing and conveying system system does not need a lot of mechanical equipment, so its maintenance cost is relatively small. In addition, in the process of use, it is only necessary to clean the pipeline regularly and keep it airtight.

3. be simple in structure

The structure is relatively simple and the operation is very convenient. It can be transported flexibly in horizontal, vertical or inclined directions to adapt to different production environments.

4. energy saving and environmental protection

In the process of Powder metering mixing and conveying system opening, dust pollution and noise pollution will hardly occur, which is more environmentally friendly than traditional mechanical transportation.

5. Flexible configuration of conveying pipeline and optimization of process flow.

The conveying pipeline can be flexibly configured according to the factory layout and process requirements, and can meet the conveying requirements regardless of the horizontal, vertical or inclined direction. In addition, the Powder metering mixing and conveying system system can be seamlessly connected with other production equipment to improve the overall production efficiency.

Powder metering mixing and conveying system

3、Powder metering mixing and conveying system structure

The Powder metering mixing and conveying system structure is introduced as follows:

1. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Powder metering mixing and conveying system system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

2. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

3. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

4. control system

The control system is the "brain" of the Powder metering mixing and conveying system system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

5. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

Powder metering mixing and conveying system

4、Powder metering mixing and conveying system application

Powder metering mixing and conveying systems have the following purposes.

1. material handling

Powder metering mixing and conveying system system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

2. Bulk material transportation

The Powder metering mixing and conveying system is especially suitable for conveying powdery, granular and flowable bulk materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, pharmaceutical powder, etc. Through the Powder metering mixing and conveying system, these materials can be efficiently transferred between different production links or equipment.

3. Multi-point transportation

The Powder metering mixing and conveying system system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

4. cut down on energy consumption

Although the power consumption of the Powder metering mixing and conveying system is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

5. Dust removal and purification

The Powder metering mixing and conveying system system is usually equipped with a dust collector to collect and treat the dust generated in the transportation process to keep the production environment clean and hygienic.

Powder metering mixing and conveying system

5、Powder metering mixing and conveying system performance advantage

Powder metering mixing and conveying systems have the following advantages.

1. High conveying efficiency and low cost.

The Powder metering mixing and conveying system can realize the continuous and efficient transportation of materials, which is not limited by the site and distance, and is especially suitable for long-distance and large-scale material transportation.

2. Low maintenance cost

The Powder metering mixing and conveying system device has the advantages of simple structure, few moving parts, convenient maintenance and reduced maintenance cost. At the same time, the equipment occupies a small area and can make full use of space.

3. High degree of automation

The Powder metering mixing and conveying system system is easy to realize automatic control.

4. Various process operations can be realized.

While conveying materials, the Powder metering mixing and conveying system system can also complete a variety of production processes, such as mixing, crushing, grading, drying, cooling, etc., which improves production efficiency and added value of products.

5. Multi-point to multi-point transportation

The Powder metering mixing and conveying system system can realize multi-point to multi-point transportation, meet the needs of different production lines and improve the production flexibility.

Powder metering mixing and conveying system

6、Advantages of Powder metering mixing and conveying system principle

Powder metering mixing and conveying systemthe principle is simple.Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline. In the process of transportation, gas-solid separator (such as dust collector) is used to separate materials from air to ensure the quality of transported materials.，Widely used inEnvironmental protection and cleaner production,Long-distance and multipoint transportation,Long distance transportation,cut down on energy consumption,Multi-point transportation and so on。

Powder metering mixing and conveying system

Powder metering mixing and conveying systemCommonly used inBulk material transportation,Mixing and classification,Process assistance,Dust removal and essence,Reduce pollution and so on，it has the characteristics of energy saving and environmental protection, Quantitative transportation, automation, High reliability and Centralized transportation。